<var id="ttnhx"></var>

    <em id="ttnhx"></em><progress id="ttnhx"><nobr id="ttnhx"></nobr></progress>
    <output id="ttnhx"><var id="ttnhx"><track id="ttnhx"></track></var></output>

      <noframes id="ttnhx"><pre id="ttnhx"></pre>

        <nobr id="ttnhx"><thead id="ttnhx"><delect id="ttnhx"></delect></thead></nobr>

        <rp id="ttnhx"><menuitem id="ttnhx"></menuitem></rp>

            新聞瀏覽>>企業新聞

            發表日期:2023-01-31  作者:辰工科技技術部


              我公司與中油測井大慶分公司合作,對“大慶油田”-“徐深6-平6氣井 15段”進行高頻壓力監測與評價,通過井口安裝自主研發的高頻壓力計和配套的云端解釋分析軟件,實時給出了裂縫的開啟情況及位置,獲得了裂縫形態、裂縫規模及壓裂區域滲透率及平均圧力等壓裂核心參數。

              通過高頻壓力監測系統對該井進行了近10天的實時井口高頻壓力錄取監測,取得了合格的高頻壓力資料。該井壓裂15段,共計35簇,其中首段滑套壓裂。除第13段有1簇未完全開啟外,其余簇均打開,壓裂簇打開成功率較高,壓裂效果較好。

              井口高頻壓力計可以助力油田壓裂-燜井-返排-生產的全過程監測與評價:能夠確定壓裂進液點位置,確定壓裂開啟的裂縫條數;利用停泵后壓降數據試井分析以及數值模擬技術可以計算壓后裂縫參數,尤其是可以給出核心的SRV體積,為產能預測提供依據;能夠進行工程檢測,包括橋塞密封性分析,確定橋塞位置;射孔彈起爆情況檢測和起爆位置定位等,為建設百年油田再創佳績!

            我公司完成大慶油田徐深6-平6氣井15段壓力監測 我公司完成大慶油田徐深6-平6氣井15段壓力監測

            News Browsing>>Company News

            Congratulations on our company's passing the first batch of high-tech enterprises in Anhui Province in 2021

            Publish Date: 2021-12-23  Author: Chengong Technology Department


            Recently, Anhui Science and Technology Department, Finance Department and Taxation Bureau jointly issued 《the notice on publishing the list of the first batch of high-tech enterprises in Anhui Province in 2021》, announcing the list of the first batch of high-tech enterprises in Anhui Province in 2021, among which our company Hefei CHENGONG Technology Co., Ltd. was listed.

            In order to promote the development of China's high-tech industry, the Ministry of science and Technology issued 《the administrative measures for the identification of high-tech enterprises in 2008》. The measures put forward higher requirements for the identification of high-tech enterprises, including the need to have independent intellectual property rights, products (services) within the specified scope of high-tech fields supported by the state, the proportion of scientific researchers, R & D investment Income proportion of high-tech products (services), development organization and management level, transformation ability of scientific and technological achievements, etc. In order to successfully obtain the high-tech enterprise certificate, the senior leaders of the company paid close attention to it. On the basis of fully learning and digesting the recognition conditions of high-tech enterprises, the company formulated a detailed work plan. After many months of hard work, with the cooperation of various departments, the company defined the work nodes, concentrated key personnel, and conducted in-depth research and discussion on key and difficult problems. We have successfully completed the submission of online and written materials on time and quality.

            This is the fourth time since our company obtained the national high-tech enterprise certificate for the first time in 2008. It is the full affirmation of our technology, management, service level and innovation strength by the government and the industry. At the same time, it also fully shows the increasing competitiveness of our company in the field of petroleum exploration and development and engineering software development in the petroleum industry, as well as the increasing economic benefits.

            Our company will also take this opportunity to continue adhering to the concept of technology first and continuous innovation, further increase R & D investment and improve core technology competitiveness; Further promote the process of independent innovation and independent R & D, strengthen the company's technological innovation ability, and provide strong technical support for the rapid development of enterprises!

            Prev: None

            高潮毛片无遮挡高清免费视频

            <var id="ttnhx"></var>

              <em id="ttnhx"></em><progress id="ttnhx"><nobr id="ttnhx"></nobr></progress>
              <output id="ttnhx"><var id="ttnhx"><track id="ttnhx"></track></var></output>

                <noframes id="ttnhx"><pre id="ttnhx"></pre>

                  <nobr id="ttnhx"><thead id="ttnhx"><delect id="ttnhx"></delect></thead></nobr>

                  <rp id="ttnhx"><menuitem id="ttnhx"></menuitem></rp>